Evolution Powersports Silicone Charge Tube have 30% larger ID over the OEM Charge Tube.

• This is important – especially at the higher flow of tuned vehicles.
• The OEM plastic charge tube does not have a positive seal and will leak at the throttle body and turbo discharge.
• Silicone provides a near perfect seal.
• Our charge tube has been burst tested to over 80 PSI and absolutely will not split due to heat or high boost.
• The tubes have a port for the map sensor, BOV and an extra port for a boost gauge as well as being a pressure port for our Captain’s Choice cutout exhaust.
• The OEM T Bolt clamps will be reused as these are already very good parts.
• Unlike cheap imitations, the EVP Silicone Charge tube is a 4 layer, high durometer design which resists swelling at high boost pressures.

This product is exempt from the emission standards and related requirements of 40 C.F.R. § 1051 as provided by 40 C.F.R. § 1051.620, and California law [e.g., vehicle code§§ 27156 and 38391]. This product is sold only for use in connection with EPA -certified, purpose-built, nonroad vehicles used solely for closed course, nonroad competition/racing and not used for any recreational purpose or on public highways or right of ways maintained by and open to the public. This product is sold only in connection with machines that do not fall under state and/or federal noise or emission standards/regulations. Purchasers who/that purchase this product represent and warrant that the product is purchased only in connection with EPA -certified, emission-regulations-exempt and noise-regulations-exempt competition/racing vehicles as interpreted under applicable state and/or federal law. Questions: Call Evolution Powersports at (715) 247-3862.